Narrow Results

You've Selected

Remove Product Category

Clear All

Search within these results

Product Category

Certifications

Codes

Search Results

Number of Results: 601

Products (601)

Sort By:

Previous 5 6 7 8 9 Next Page 7 of 13

Results per page:

XG-SGLFO-50

Model XG-SGLFO-50 is a face only medium security steel supply grille. The lattice face has 1/2-inch by 13/16-inch openings.

XG-SGDF

Model XG-SGDF is maximum security barrier constructed of 1/2-inch steel rods welded every six-inch on center both vertically and horizontally in a two-inch flat frame for installation into secure openings.

XG-SGDB

Model XG-SGDB is maximum security barrier constructed of 1/2-inch steel rods welded every six-inch on center both vertically and horizontally in a 3/16-inch sleeve intended for mounting in walls.

XG-RPF

Model XG-RPF aluminum perforated face return or exhaust filter grilles blend into the ceiling system and provide a clean, uncluttered architectural appearance. The XG-RPF is designed for one-inch thick filters (provided by others) and includes a hinged face with thumb latches for quick filter change

XG-PHPS-E

Model XG-PHPS-E is a high-performance ""E Series"" plenum slot diffuser with no insulation.

XG-FCI-600

Model XG-FCI-600 is a fan-powered terminal unit engineered to provide a balance between quiet operation, minimal footprint, and a broad flow range. All XG-FCI-600 terminal units are AHRI certified and shipped with the AHRI seal. Capacities ranging from 200-4,400 cfm in six casing sizes. Pneumatic,

XG-FCQ-700

Model XG-FCQ-700 quiet fan-powered air terminal units provide noise levels that are the best in the business. The XG-FCQ-700 includes industry-leading tuned inlet and discharge attenuators and each unit is AHRI certified and shipped with the AHRI seal. Capacities ranging from 200-4,400 cfm in six c

XG-FCL-600

Model XG-FCL-600 low profile fan-powered terminal units provide a balance between quiet operation, minimal footprint, and a broad flow range with a reduced height for low clearance ceiling applications. Every XG-FCL-600 includes a bottom rigid access panel. These simple-to-remove panels provide acc

XG-PHPSI-E

Model XG-PHPSI-E is an insulated high performance ""E Series"" plenum slot diffuser.

XG-2100MC

Model XG-2100MC is an extruded aluminum linear bar grille mitered corner section with 7/32-inch bars on 1/2-inch centers and 1/2-inch flanged frame, available in 90°, 135° or special angles (SA) with 0°, 15°, or 30° blade deflection.

XG-TL-500

Model XG-TL-500 single duct air terminal unit is for low-profile applications. The unit is served by a central air handler and modulates the amount of primary cooling air to the space between a minimum set point and the design airflow. Its construction uses industry-leading continuous welded primar

XG-BP-600

Model XG-BP-600 is a bypass air terminal unit used to achieve variable air volume delivery of of conditioned air to a space or zone where constant volume air handlers exist. The XG-BP-600 delivers a constant volume of air, but varying amounts are delivered to the space and the bypass plenum. Capaci

XG-PHPS-J

Model XG-PHPS-J is a high-capacity ""J Series"" fixed blade plenum slot diffuser with no insulation.

XG-PHPSI-J

Model XG-PHPSI-J is an insulated high-capacity ""J Series"" fixed blade plenum slot diffuser.

XG-FVL-600

Model XG-FVL-600 parallel fan-powered terminal unit is designed to provide superior comfort to zones by intermittent parallel fan operation. These air terminal units have reduced height for low clearance applications, are AHRI Certified and ETL listed. Capacities ranging from 200-2,500 cfm in three

XG-FVI-500

Model XG-FVI-500 variable volume parallel fan-powered air terminal units provide superior comfort to zones by intermittent parallel fan operation and offer lower operating costs. Capacities ranging from 150-5,600 cfm in seven casing sizes. Pneumatic, electric, analog, or direct digital controls ava

XG-DD-500

Model XG-DD-500 air terminal units regulate the flow of conditioned air in a dual duct air distribution system. The air terminal unit receives both heated and cooled air and mixed in a plenum (provided by others) to reach the desired discharge temperature. The XG-DD-500 offers a CFM range capacity

XG-DH-500

Model XG-DH-500 is a high-performance air terminal unit designed to regulate the flow of conditioned air in dual duct air distribution systems. Both heated and cooled air are provided to the air terminal and mixed in an integral plenum to reach the desired discharge temperature. The XG-DH-500 provi

XG-DS-600

Model XG-DS-600 short mixing dual duct air terminals regulate the ﬂow of conditioned air and or outside air in air distribution systems. The XG-DS-600 takes heated and cooled conditioned air, heated or cooled conditioned air along with outside air to the air terminal and mixes the air in an integra

XG-6675TZ4

Model XG-6675TZ4 (supply) is a four-inch wide extruded aluminum linear slot diffuser with 3/4-inch slot width compatible with TechZone™ style ceiling systems.

XG-RT-500

Model XG-RT-500 round retrofit air terminals regulate the flow of conditioned air in single or dual duct air distribution systems. The XG-RT-500 can also provide positive or negative pressures in laboratory flow-hood applications. Model XG-RT-500 is ready for installation into existing duct-work in

XG-SR-500

Model XG-SR-500 products fit into existing low pressure square or rectangular duct systems. The XG-SR-500 offers multiquadrant, averaging flow sensor for highly accurate (+/-5%) readings with varying inlet duct configurations after a certified balancer balances the terminal. Capacities ranging from

XG-RA-500

Model XG-RA-500 retrofit assemblies are customized retrofit valves designed to slip into existing mechanically regulated single or dual duct terminals. The units allow the conversion of constant volume systems to more energy-efficient, variable volume systems. XG-RA-500 assemblies currently fit mos

XG-6600SQ

Model XG-6600SQ is an extruded aluminum architectural square linear slot, un-insulated supply diffuser available with 1/2-inch, 3/4-inch, or one-inch slot widths and one to four slots.

XG-DGLP

Model XG-DGLP is an extruded aluminum door/transfer grille with light-resistant core.

XG-PHPS-IT

Model XG-PHPS-IT is a plenum slot supply diffuser with aluminum ""ice tong"" pattern deflectors. The XG-PHPS-IT has no insulation.

XG-4500F

Model XG-4500F is a heavy-duty aluminum return grille with 0° deflection horizontal blades used in applications such as gymnasiums and public areas where a filter is required at the return grille.

XG-L

Model XG-L is an aluminum ceiling supply grille with long adjustable curved blades and one-way air pattern.

XG-4500

Model XG-4500 is an aluminum heavy-duty return grille with 0° deflection blades designed to withstand moderate physical abuse in applications such as gymnasiusm and public areas.

XG-6600SQR

Model XG-6600SQR is an extruded aluminum architectural square linear slot, return diffuser available with 1/2-inch, 3/4-inch, or one-inch slot widths and one to four slots.

XG-6600SQI

Model XG-6600SQI is an extruded aluminum architectural square linear slot, insulated supply diffuser available with 1/2-inch, 3/4-inch, or one-inch slot widths and one to four slots.

XG-PHCR

Model XG-PHCR is a fixed curved blade plenum slot supply/return diffuser with no insulation.

XG-PHCR-DB

Model XG-PHCR-DB is a fixed curved blade plenum slot supply/return diffuser with center down blow section and has no insulation.

XG-PHCRI

Model XG-PHCR is an insulated fixed curved blade plenum slot supply/return diffuser.

XG-PHCRI-DB

Model XG-PHCRI-DB is an insulated fixed curved blade plenum slot supply/return diffuser with center down blow section.

XG-PHCS

Model XG-PHCS is a fixed curved blade plenum slot supply diffuser with no insulation.

XG-PHCS-DB

Model XG-PHCS-DB is a fixed curved blade plenum slot supply diffuser with center down blow section and no insulation.

XG-PHCSI

Model XG-PHCSI is an insulated fixed curved blade plenum slot supply diffuser.

XG-PHCSI-DB

Model XG-PHCSI-DB is an insulated fixed curved blade plenum slot supply diffuser with center down blow section.

XG-CC5CO

Model XG-CC5CO is an aluminum core only ceiling return grille with 1/2-inch x 1/2-inch x 1/2-inch aluminum cube core. Available in 3-week Industry-leading lead times.

XG-LTV

Model XG-LTV is an aluminum double deflection ceiling supply grille with two-way air pattern, curved front blades and rear vertical blades that are individually adjustable.

XG-LTC3M

Model XG-LTC3M is an aluminum ceiling supply grille with three-way corner air pattern, curved blades that are individually adjustable and multi-shutter damper.

XG-RL

Model XG-RL is an aluminum high capacity Roto-Louver with vertical deflection blades mounted in a drum that are individually adjustable.

XG-6675RTZ6

Model XG-6675RTZ6 (return) is a six-inch wide extruded aluminum linear slot diffuser with 3/4-inch slot width compatible with TechZone™ style ceiling systems.

XG-6675RTZ4

Model XG-6675RTZ4 (return) is a four-inch wide extruded aluminum linear slot diffuser with 3/4-inch slot width compatible with TechZone™ style ceiling systems.

XG-2000MC

Model XG-2000MC is an extruded aluminum linear bar grille mitered corner section with 7/32-inch bars on 1/2-inch centers and one-inch flanged frame, available in 90°, 135° or special angles (SA) with 0°, 15°, or 30° blade deflection.

XG-6675TZ6

Model XG-6675TZ6 (supply) is a 6 inch wide extruded aluminum linear slot diffuser with 0.75 inch slot width compatible with TechZone™ style ceiling systems.

XG-2300MC

Model XG-2300MC is an extruded aluminum linear bar grille mitered corner section with 1/8-inch bars on 1/4-inch centers and one-inch flanged frame, available in 90°, 135° or special angles (SA) with 0°, 15°, or 30° blade deflection.

XG-H4002

Model XG-H4002 is an aluminum sidewall supply grille with horizontal single deflection blades that are individually adjustable. Available in 3-week Industry-leading lead times.

XG-2400MC

Model XG-2400MC is an extruded aluminum linear bar grille mitered corner section with 1/8-inch bars on 1/4-inch centers and 1/2-inch flanged frame, available in 90°, 135° or special angles (SA) with 0°, 15°, or 30° blade deflection.

Sort By:

Previous 5 6 7 8 9 Next Page 7 of 13

Results per page: