Narrow Results

You've Selected

Remove Product Category

Clear All

Search within these results

Product Category

Certifications

Codes

Search Results

Number of Results: 865

Products (865)

Sort By:

Previous 6 7 8 9 10 Next Page 8 of 18

Results per page:

Belimo Actuators

AFB/AFBUP Series - 180 in. lb. torque. AMB/AMX Series - 160 – 180 in. lb. torque. EFB/EFX Series - 270 in. lb torque. EFCX Series - 270 in. lb torque. FSAFB Series - 180 in. lb. torque. FSAFxxA Series - 180 in. lb torque. FSLF Series - 30 in. lb. torque. FSNF Series - 70 in. lb. torque. FSTF Series

TAUB-L/H

The motor mounted on model TAUB-L/H is out of the airstream. This makes it suitable for clean air, high-temperature process exhaust or high-temperature emergency smoke removal. The TAUB-L/H has rolled damper blades, gasket covered edges, fully welded and coated housing with steel blades. Its maximu

LB

Model LB is a belt drive, fabra hood-style fan, designed for roof mounting in clean air exhaust applications, where height and aesthetics are a concern. The units feature a backward-inclined wheel, with a low silhouette housing. 950 to 37500 cfm Up to 2.125 in. wg.

CUBE

Use this belt drive centrifugal roof or wall mounted fan for exhausting contaminated or grease laden air. With a single piece, continuously welded, spun aluminum housing, exhaust air is discharged away from the mounting surface. 180 to 30,000 cfm Up to 5.0 in. wg.

Insulated coil section (ThermiCoil®)

ThermiCoil® coils with insulated casings are suitable for refrigerant and hydronic applications and can accommodate a wide range of airflows. These address the needs of facilities with rigorous indoor air quality standards.

TAUB-CA

This belt drive model has a welded housing, powder coating with cast aluminum hub and blades. Typical applications include clean air, fume exhaust, and spark resistant construction. Features include a belt tube and bearing cover protecting drives from airstream, butterfly dampers with a rolled edge

TBI-CA

The TBI-CA is a belt-driven model with a cast aluminum hub and airfoil propellers. Key features are compact size, mounting flexibility, and ease of performance adjustments. Model TBI-CA cast aluminum impeller, sealed internal belt and bearing enclosure meets spark resistant specifications. Typical

TAUD

Model TAUD is a direct drive axial exhaust model with cast aluminum hub and blades. Typical applications include clean air, fume exhaust, and spark resistant construction. Features include butterfly dampers with a rolled edge for increased strength and gasket covered edges for quiet closure. 2,600

Booster Coils

Hot water and steam booster coils are available in one- or two-row configurations. All coils have 5/8-inch OD copper tubes, .006 aluminum fins, and one-inch flanged or slip and drive galvanized casings in four-inch depth. Fin heights up to 24-inches.

Steam Coils

Standard steam and non-freeze steam distributing coils are available in 5/8-inch OD copper tubes, up to .049 thickness, one- or two-row coils with aluminum or copper fins. Casing options include flanged, pitched, end plates only, and inverted side plate flanges in galvanized, stainless steel, and c

SP-A

Greenheck SP-A exhaust fans are direct drive, ceiling mounted fans designed to provide the lowest sound levels. Units feature an insulated housing and Energy Star rated units are available. Fan sizes from 50 to 1600 cfm Up to 1.0 in. wg. For use in residential, multifamily and commercial applicatio

SP-B

A direct drive, ceiling exhaust fan with a low profile housing and low sound levels. Energy Star rated units are available. Fan sizes from 50 to 200 cfm Up to 1.0 in. wg. For use in commercial kitchen/restaurant applications

92/93 Series

Series 92/93 actuators are rack and pinion, opposed-piston actuators available in two versions: double acting for rotation of 90°, 135° and 180°, and spring return for 90° rotation. This actuator is completely enclosed and self-contained.

SS

Model SS is a direct drive propeller supply fan designed for clean air, wall mount applications. The SS features fabricated steel or aluminum propellers. 100 to 7,100 cfm Up to 0.75 in. wg.

IDHB

The IDHB series is a basic, economical duct heater available in limited sizes. This duct heater features: UL 1996 licensed 50/60 Hz compatibility Zero clearance Fan interlock Power and control terminal boards Automatic reset thermal safety switch for primary over temperature protection Manual reset

RV

Pre-engineered rooftop ventilators deliver fresh outside air to a building that is tempered and dehumidified for space comfort. This unit is ideal for 100% outdoor air, variable air volume, and single zone applications. Airflow Range: 500 - 18,000 cfm Cooling Capacity: 3 - 70 tons Unit Construction

RVE

Pre-engineered rooftop unit features a total enthalpy wheel that rotates between two airstreams while transferring both sensible (heat) and latent (moisture) energy. Ideal for applications requiring high percentages of outdoor air, the enthalpy wheel offers up to 80% total effectiveness significant

MSEM

The MSEM design package has hand/off/auto capability and class 5 to 30 electronic overload (up to 300HP). The motor starter has LED status indicators in case of faults and advanced control capability for dampers, fireman's override, shutdown, permissive auto, and fault status. It is available with

Direct Expansion (DX) and Condenser

DX and condenser coils are available in 1-, 5/8-, 1/2-, and 3/8-inch OD copper tubes with aluminum or copper fins. Face split and intertwined circuiting available. Casing options include flanged, end plates only, and inverted side plate flanges in galvanized, stainless steel, and copper materials.

70 series

The Series 70 features on/off or modulating control. Designed like a junction box, the Series 70 offers easy access to terminal block wiring, cam adjustments and switch installation.

Greenheck NEMA 4/4X

Protect against rain, snow, dirt, and splashing water.

ECV

The ECV uses a total energy core with options for fan VFDs, microprocessor controls, BMS integration and core economizer for indoor or outdoor installations. 500 to 4,400 cfm (fiber membrane energy core) 500 to 5,000 cfm (polymer membrane energy core) Up to 1 in. wg

MiniCore

The MiniCore uses a total energy fiber membrane core, direct drive fans, and Vari-Green® electronically commutated motors. Designed for indoor installations, the MiniCore can mount in any orientation and features configurable intake and discharge connections. 150 to 1,000 cfm Up to 1 in. wg

MSAC

An MSAC offers an innovative and versatile design with hand/off/auto capability and class 10 or 20 electronic overload (1-40 FLA). The unit provides LED status indicators in case of faults and provides advanced control capability for dampers, fireman's override, shutdown, permissive auto, and fault

IDHE

The IDHE is a universal duct heater that eliminates the need for right- and left-handed designs. The IDHE has the following features: Six mounting positions with vertical up and down flow Rotation to fit the requirements and location of the HVAC system Standalone duct heater capability Lower standa

Multi-Voltage Transformer

The Multi-Voltage transformer converts primary voltage of 480V/277V and 240V/208V to secondary voltage of 120V.

MS-1P

The MS-1P is a concealed compact design packaged with hand/off/auto capability and a wide range class 10 electronic overload (1-16 FLA) so it can function in many applications. The operation allows for manual control of input power. Available in NEMA-1, NEMA-4 and NEMA-4X enclosures.

120V to 24V Transformer

The 120V to 24V transformer is used for converting primary voltage of 120 to secondary voltage of 24V.

Remote Interface

End-users no longer need physical access to the unit mounted microprocessor to adjust control point parameters. The optional remote interface displays and allows control point parameters to be adjusted. The remote interface is available as an accessory to the microprocessor or network interface.

Remote Panels

The optional remote panel makes field wiring between the remote panel and unit easier. Labels are the same for terminals on the remote panel and unit (example: R to R, G to G, etc.). What's more, switches on the remote panel replace the need for someone in the field to provide contacts for fan enab

BVF

BVF Brick Vents make possible simplified installation in existing walls. The brick vents are designed with an overlapping louver blade. They incorporate a 7 x 7 mesh insect screen and a high waterstop at the rear of the brick vent.

Furnace Control

Indirect gas-fired furnace units come with a standalone furnace controller. The furnace control has a keypad and easy-to-read LCD display allowing users to adjust all set points, lockouts and delays. It includes a furnace-commissioning menu with preprogrammed steps through the furnace start-up. The

ERV

The ERV low profile design with several duct configurations allows for floor-mounted, ceiling-hung, or outdoor installations. Access panels or optional hinged doors provide easy access to the unit’s energy wheel, filters, motors and controls. Optional fan VFDs, BMS integration and wheel economizer

MiniVent

The compact design of the MiniVent provides an economical solution for individual spaces, such as school classrooms and small offices. Configurable intake positions allow for floor mounted or ceiling-hung installations. Each unit comes standard with backdraft dampers and Vari-Green ® electronically

BVE

BVE Brick Vents are the answer where a fine finish is a prerequisite, where a superior brick vent is required at a minimum cost. The brick vents are designed with a deep louvered overlapping blade and incorporate a 7 x 7 mesh insect screen.

ERM

ERM transfers sensible (heat) and latent (moisture) energy between counter-flowing air streams, preconditioning outdoor air to near room conditions. The unit consists of a cabinet and a slide out energy recovery cassette. The fully insulated cabinet installs as a permanent part of the duct system.

VRAD

The VRAD negative pressure relief door also opens automatically at 1 in. wg above normal operating system pressure. This door prevents ductwork from imploding if system damper(s) close while the fan is still operating.

PRAD

The PRAD positive pressure relief door opens automatically at 1 in. wg above normal operating system pressure. These doors prevent ductwork from exploding if system damper(s) close while the fan is still operating.

ERVe

This unit offers many configurations and is designed for easy installation on rooftops or outdoor ground pad mounting. Weatherproof, double-wall insulated housing with hinged access doors allow easy access to the unit’s wheel filters, motors and controls. An optional, BMS integration and wheel econ

IGX

Model IGX is a highly configurable indirect gas-fired heating system. The unit has a modular design for maximum flexibility. Recirculation and VAV options are available in addition to constant volume, 100% outdoor air operation. The IGX has heating, cooling, and airflow capacities to provide make-u

RAD

The RAD series round duct access doors provide a durable, practical, and economical means of gaining access to components inside the ductwork. This model comes insulated or uninsulated.

80/20 Recirculation

The 80/20 recirculation system is a hybrid make-up air system. Supply air is a variable mixture of return air and fresh outdoor air. Outdoor air volumes vary from 20% to 100% of total airflow, often configured to respond to building pressure fluctuations. The 80/20 units are excellent for facilitie

Microprocessor

An optional microprocessor controller that is factory programmed, wired, and tested prior to shipment. The controller can operate stand-alone or integrated with a Building Management System (BMS) using BACnet MS/TP or IP, or Modbus RTU or IP protocols. This controller is responsible for operating th

MSX

The MSX is a highly configurable make-up air unit that can be utilized to meet the needs of a variety of applications. The MSX’s modular design allows for a wide range heating, cooling, and filtration options. 800 to 48,000 cfm and 4 in. wg ETL listed

HAD

The HAD-10 duct access door has a continuous piano-style hinge. The door provides a durable, practical, and economical means of gaining access to components inside the ductwork.

CAD

The CAD-10 duct access door has two CAM latches. The door provides a durable, practical, and economical means of gaining access to components inside the ductwork.

AMS

The AMS is a standalone product. It offers an accurate airflow measuring, furnished with a properly sized pressure transducer that outputs a signal proportional to cfm. Velocity: 300 to 3,000 fpm Temperature: -20°F to 180°F Airflow monitoring accuracy: 5% of reading

USGF

The USGF is a belt drive fan ideal for heavy grease exhaust applications where cooking requires large amounts of grease and/or solid fuels. Units feature a non-stick coated steel wheel with a steel housing and curb cap. The unit is powder coated for added protection. 330 to 6800 cfm Up to 3.25 in.

Honeywell Actuators

MS-4120, 4620, 8120 Series - 175 in. lb. torque. MS-4209, 4309, 4709, 4809, 8209, 8309 Series - 30 or 80 in. lb. torque. MS7505, 7510, 7520, 8105, 8110 Series - 44, 88 and 175 in. lb. torque. MS7520 series - 175 in. lb. torque. MSxx04, xx09 Series - 30 in. lb. or 80 in. lb. torque.

Vektor®-MS

The Vektor-MS is an inline fan with a bifurcated housing to keep drive components out of the contaminated airstream. Its variable geometry nozzle (VGN) technology recognizes changes in airflow and static pressure in an occupied space. This causes the fan’s operation to adjust throughout the day bas

Sort By:

Previous 6 7 8 9 10 Next Page 8 of 18

Results per page: