Search Results

Number of Results: 1441

Content (1441)
Previous 22 23 24 25 26 Next Page 24 of 29
Results per page:

  • eCAPS Brochure

    eCAPS Quickly select and specify the best value products for your project. • Online and always up-to-date • Fast and efficient — compare multiple models simultaneously • Over 10,000 models and sizes of fans, 75 louver models and a damper selection guide • Simplified Dedicated Outdoor Air System (DOA

  • Adjustable Pressure Controller (APC) for EM Series

    EM-10, Horizontal Mount, Vertical Airflow Up EM-30, Vertical Mount, Horizontal Airflow EM-40, Horizontal Mount, Vertical Airflow Down Area Maximum Set Pressure (ft2) (m2) (in. wg) (Pa) 4 0.37 0.75 187 6 0.58 0.50 125 8 0.74 0.40 100 10 0.93 0.30 75 15 1.40 0.20 50 20 1.86 0.15 37 24 2.23 0.125 31 It

  • Quick Connect Breakaway Connection

    Quick Connect is used to connect a damper sleeve to a rectangular duct when a tight duct connection is required. The connector gives an airtight cross connection without the use of slip joints, and is an acceptable breakaway connection when installed properly. Particular attention should be given to

  • Vektor-MD Silencer Fastener Kit (#1016009 IOM)

    1 Fastener Kit • Inline Silencer, Rev. 1, February 2018 Copyright 2018 © Greenheck Fan Corp. ® Document 1016009 Vektor-M Series Fastener Kit Inline Silencer Laboratory Exhaust System Assembly Instructions READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING ASSEMBLY. Phone: (715) 359-6171 • Fax: (715)

  • Model APEX (#462255 IOM)

    "Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with inst

  • 7800 Series Relay Module

    ® U.S. Registered Trademark Copyright © 1998 Honeywell Inc. • All Rights Reserved CHECKOUT AND TEST 65-0229-1 7800 SERIES Relay Modules This publication provides general checkout and troubleshooting procedures for the 7800 SERIES Relay Modules. SYSTEM CHECKOUT IMPORTANT Perform all Static Checkout P

  • Furnace Model PVF 4:1 Modulating Valve (#474047 IOM)

    "® Supplementary Information ® Part #474047 Furnace Models PVF and PVG 4:1 Modulating Valve 14:1 Modulating Valve Typical EXA Modulating Gas Valve Typical Honeywell Combination Valve This unit is equipped with a model PVF or a model PVG indirect gas-fired furnace that has a 4:1 turndown. The primary

  • Model AFL-501 Interior Flange (IOM #483328)

    ® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with the

  • Fan Discharge and Throw Information (FA/104-00R)

    product application guide ® A technical bulletin for engineers, contractors and students in the air movement and control industry. Fan Application FA/104-00R P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399® Copyright © 2001 Greenheck Fan Corp. Fan Discharge and Throw Information

  • MiniVent

    "Product Specification GuideGreenheck Model MiniVent –– Energy Wheel Air-to-Air Energy Recovery VentilatorFor Outdoor or Indoor InstallationCSI MasterFormat Category 23 XX XX (Greenheck suggests the use of category 23 72 13) ***************************************************************************

  • FSD-311V Series

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel FSD-311V Combination Fire Smoke DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) ****************************************************************************************

  • Belt Drive, Model RBUMO

    "Product Specification GuideModel RBUMO Belt Drive Propeller Upblast Fan - Motor Out of AirstreamFacility Services Subgroup: Division 23 Section 23 34 23 ************************************************************************************************************************ Specifier Notes: This pro

  • QEIDFJ Direct Drive

    "Product Specification GuideDirect Drive Mixed Flow Inline Fans, Model QEIDFJFacility Services Subgroup: Division 23 (Previously Division 15) ************************************************************************************************************************Specifier Notes: This product specific

  • CRD-1WJ Series

    " P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.comProduct Specification GuideModel CRD-1 WJ Ceiling Radiation DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) *********************************************************************************************

  • Vektor-ERS Fastener Kit (#1032090)

    1 Fastener Kit • Interior Section of Modular Roof Curb, Rev. 1, October 2021 Copyright 2021 © Greenheck Fan Corp. ® Document 1032090 Vektor-ERS Fastener Kit Interior Section of Modular Roof Curb Laboratory Exhaust System Assembly Instructions READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING ASSEMBL

  • RAD

    Greenheck round duct access doors provide a durable, practical and inexpensive means of gaining access to components inside the ductwork. Round Duct access door provides a solid leakage proof door that is simple to install This access door has been tested to 20 in. wg and negative 10 in. wg with no

  • EAD-632W

    EAD-632W Adjustable Louver, Drainable Blade Extruded Aluminum Standard Construction Frame Heavy gauge extruded 6005-T5 aluminum, 6 in. (152 mm) x 0.081 in. (2 mm) nominal wall thickness Blades Drainable design, heavy gauge extruded 6005-T5 aluminum, 0.088 in. (2 mm) nominal wall thickness, positione

  • QD-Cat_RoofandSidewallMountedFans

    4 Roof Sidewall Mounted Model G Direct Drive and GB Belt Drive Centrifugal downblast fans are designed for clean air exhaust applications requiring roof mounting. Quick Delivery / Quick Build Performance G capacities range from 50 to 6,600 cfm and 2.75 in. wg of static pressure. GB capacities range

  • BAPI Zone Pressure Touch (ZPT) Sensor Installation Instructions

    32215_ins_ZPT_SR_NT.pdf Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:sales@bapihvac.com • Web:www.bapihvac.com Zone Pressure Touch (ZPT) Sensor - Standard Range Installation and Operation Instructions rev. 05/0

  • AFL-501 Product Information

    AFL-501 GREENHECK’S Aluminum FEMA 361 Louver PRODUCT INFORMATION Features and Benefits • Ideally suited to protect exterior wall penetrations on FEMA 361 or 320 compliant storm shelters or safe rooms • A ll aluminum construction for superior weatherability - 5 ½ in. deep frame - Inverted V style bla

  • Alignment Plate Installation (#482876 IOM)

    ® Aignment Plate Installation 1® Document 482876 Alignment Plate Installation Models: ESD-603, EDJ-601; ESD-635. ESJ-602, ESD-635X Alignment Plate #508290 Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to

  • Standard Direct Expansion (DX) Cooling Air Conditioning System

    Sight Glass / Moisture Indicator: Provides a view into the system. Indicator is green normally, yellow when high in moisture. Supply Air: Enters the evaporator coil warm and leaves cool. Design condition for outdoor air is 95ºF dry bulb 75ºF wet bulb. Typical leaving air design condition is 55ºF dry

  • Model ERT (#460945 IOM)

    "® Document 460945 Model ERT Energy Recovery Ventilator with Tempering Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and o

  • Warranty Statement for Louver Baked Enamel Finish

    P.O. Box 410 Schofield, WI 54476 Phone: 715.359.6171 www.greenheck.com Warranty Statement for Louvers Architectural Finish Limited Warranty Baked Enamel Paint Greenheck warrants the finish of baked enamel paint for a period of 1 year from the date of product shipment when applied to aluminum louvers

  • Warranty Statement for Louver Baked Enamel Finish Galvaneal

    P.O. Box 410 Schofield, WI 54476 Phone: 715.359.6171 www.greenheck.com Warranty Statement for Louvers Architectural Finish Limited Warranty Baked Enamel Paint Greenheck warrants the finish of baked enamel paint for a period of 1 year from the date of product shipment when applied to galvaneal louver

  • HBS-330 and HBS-331

    "Heavy Blast Suppressor Damper HBS-330 HBS-331 Options Available: • Bolt holes in flanges Note: Spring Location is detemined from the perspective of viewing the damper with the blast coming towards you/facing the blast. As shown: HBS-330 left; HBS-331 right. Code Blast Loading GSA- Level C 4 psi @ 2

  • Model AFL-501 Exterior Cantilevered (IOM #483329)

    ® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with the

  • Optimizing Dedicated Outdoor Air Systems (ERA/114-07)

    "product application guide®A technical bulletin for engineers, contractors and students in the air movement and control industry. Energy Recovery Application ERA/114-07 P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2007 Greenheck Fan Corp. ® Optimizing Dedicated Ou

  • Johnson-Comm_College_Hospitality_Culinary

    Greenheck Project Profile Hospitality and Culinary Academy, Johnson County Community College Overland Park, KS Engineering Firm: Lankford|Fendler + Associates Kansas City, MO General Contractor JE Dunn Construction Kansas City, MO Mechanical Contractor Trieb Sheet Metal Company Kansas City, KS Green

  • DGX Industrial Space Heating (#470655 IOM) (2009 - 10/2017)

    ® Document 470655 Model DGX Industrial Space Heating Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing

  • Vektor-ERS M Series

    "P.O. Box 410Schofield, WI 54476Phone: 715.359.6171www.greenheck.comProduct Specification GuideAddendum Specification, Model Vektor-MD, MH or MS, Vektor Energy Recovery SystemFacility Service Subgroup: Division 23 HVAC (previously Division 15) ********************************************************

  • TAUD Direct Drive

    "Product Specification GuideDirect Drive Tube Axial Roof Mounted Upblast Exhaust Fan, Model TAUDFacility Services Subgroup: Division 23 (Previously Division 15) ************************************************************************************************************************Specifier Notes: Th

  • Models PVF and PVG (#483094 IOM) Canadian French

    ® Document 483094 Modèles PVF et PVG Modules de chauffage indirects au gaz Générateurs de chaleur indirects au gaz Modules de chauffage/générateurs de chaleur indirects au gaz 1® Manuel d’installation, d’utilisation et d’entretien Veuillez lire ces instructions et les conserver pour toute consultati

  • Model VSU Make-Up Air Unit

    Vertical Direct Gas-Fired Make-Up Air Model VSU • Industrial, Manufacturing and Warehouse Applications December 2015 • 800 - 64,000 cfm • Direct Gas-Fired Heating • up to 7,000,000 Btu/hr 2 The Greenheck model VSU uses direct gas-fired technology to provide efficient ventilation and heating in any c

  • slip_booster_drive

    SP2 1/16 FHEP1 3/16 CHFLOAL C 5 MAX 2 1/4 CD 6 EP2 3/16 SP 8 1 12 24 N DIMENSIONAL DATA IN INCHES CL OAL = MAX + FL + C3/4 MPT MODEL NO. (Example) CASING 1 MPT CU Slip Drive 8 fpi 1 row Fin Height Fin Length Non Headered CONNECTION SIZES EWTLWTGPM Performance Data CFMEDB/EWBLDB/LWBCAPACITY .010 .006

  • Damper Application Considerations for Laboratory Exhaust

    ® A technical educational paper for engineers and contractors in the air movement and control industry. Industry White Papers P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2012 Greenheck Fan Corp. Most of the focus of a laboratory exhaust system is on the fans. Ove

  • eCAPS Bridge _Using Select By model

    For feedback or questions, contact: BIM@GREENHECK.COM GREENHECK eCAPS BRIDGE FOR REVIT Using ‘Select By Model’ • The ‘Select by Model’ option allows users to browse through our content library of Level of Development 200 (LOD 200) content. (i.e., dimensionally accurate, no shared parameters, perform

  • Alignment Plate Installation (#482875 IOM)

    ® Aignment Plate Installation 1® Document 482875 Alignment Plate Installation Models: SEH-401, SED-401, EDJ-401, EDK-402, ESK-402, EDK-430, ESD-403, ESD-435, ESJ-401, ESD-435X Alignment Plate #508291 Installation, Operation and Maintenance Manual Please read and save these instructions for future re

  • QD-Cat_DuctHeaters

    86 Duct Heaters Duct Heaters Model IDHB and IDHC Greenheck has a complete line of configurable electric duct heaters that are perfectly suited to your HVAC application. Our CAPS configuration tool helps you save time with its industry-leading selection speed and information packed submittals. With qui

  • ACEEE-2017-Paper

    "A Revolutionary Method of Saving Energy for Commercial and Industrial Fan Systems Michael Ivanovich*, Mark Bublitz**, Tim Mathson*** *AMCA International; **New York Blower Company; ***Greenheck Fan Company ABSTRACT Fan energy index (FEI) and fan electrical power (FEP) are design-point metrics that

  • Model MSX

    "Product Specification GuideModel MSX – Packaged Make-Up Air Unit with Heating and/or Cooling for Outdoor or Indoor InstallationCSI MasterFormat Category 23 74 33 ************************************************************************************************************************Note to User: Thi

  • Microprocessor Controller (#474706 IOM) TAP v1.04 June 2011 (ERCH, ERH, APEX, VER, ERT)

    "1DDC Controller for Tempered Air Products Reference Guide for the DDC Controller Please read and save these instructions. Read carefully before attempting to operate or maintain the product described. Protect yourself and others by observing all safety practices. Failure to comply with instructions

  • Direct Drive, Model MAC

    "Product Specification GuideModel MAC Propeller MancoolerFacility Services Subgroup: Division 23 Section 23 34 23 ************************************************************************************************************************ Specifier Notes: This product specification guide is written in a

  • Model AFL-501 Exterior Flange (IOM #483327)

    ® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with the

  • ARI Certified vs. Non-Certified Performance Ratings of Energy Recovery Wheels (ERA/110-03)

    product application guide ® A technical bulletin for engineers, contractors and students in the air movement and control industry. Energy Recovery Application ERA/110-03 P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2005 Greenheck Fan Corp. ® ARICertified vs. Non-C

  • Models ERM 58, 64 & 74 (#457301 IOM)

    ® Energy Recovery Modules 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.

  • Sensors for Model SP Fans (#483548 IOM)

    "® Sensors for Model SP Fans 1® Document 483548 Sensors for Model SP Fans Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself an

  • madison_WI_Fire_Station

    Greenheck Project Profile Madison, Wisconsin Fire Station #11 Madison, WI Architectural Engineering Firm: Hein Engineering Group Madison, WI Architectural Firms: Plunkett Raysich Architects Madison, WI General Contractor: Miron Construction Madison, WI Help save energy by reducing cooling costs wher

  • MAC Mobile Tiltable Carriage Kit (#474909 IOM)

    "1MAC Mobile Tiltable Carriage Kit ® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety info

  • Wall Housing Sizes 8 - 54 (#471832 IOM)

    "14JEFXBMM1SPQFMMFS'BOTt8BMM)PVTJOH Assembly and Installation Instructions 1MFBTFSFBEBOETBWFUIFTFJOTUSVDUJPOTGPSGVUVSFSFGFSFODF3FBEDBSFGVMMZCFGPSFBUUFNQUJOHUP BTTFNCMFJOTUBMMPQFSBUFPSNBJOUBJOUIFQSPEVDUEFTDSJCFE1SPUFDUZPVSTFMGBOEPUIFSTCZPCTFSWJOH BMMTBGFUZJOGPSNBU

Previous 22 23 24 25 26 Next Page 24 of 29
Results per page: