Search Results

Number of Results: 1441

Content (1441)
Previous 24 25 26 27 28 Next Page 26 of 29
Results per page:

  • IG / IGX (#470656 IOM) (pre-October 2015)

    Installation, Operation and Maintenance Manual Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result

  • RBDR-50

    " P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.comProduct Specification GuideModel Round Remote Balancing Dampers – RBDR-50 SeriesFacility Service Subgroup: Division 23 HVAC (Previously Division 15) ********************************************************************************

  • SBCCenter_SanAntonio

    Greenheck Project Profile SBC Center Community Arena San Antonio, TX Architectural Engineering Firm: Ellerbe Becket, Inc. Kansas City, MO Architectural Firms: Kell Munoz Architects San Antonio, TX (Construction Documents/Coordination) Lake/Flato Architects San Antonio, TX (Exterior Design) General C

  • WDR-53 and SSWDR-53

    " P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.comProduct Specification GuideModel WDR-53 and SSWDR-53 Round Backdraft DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) ************************************************************************************

  • Model SAF (#468410 IOM)

    ® Centrifugal Roof Supply Air Fan 1® Document 468410 Model SAF Centrifugal Roof Supply Air Fan Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described

  • "EAD-635 (6"" Frame, Drainable Blade)"

    EAD-635 Adjustable Louver, Drainable Blade Extruded Aluminum Standard Construction Frame Heavy gauge extruded 6063-T5 aluminum, 6 in. (153 mm) x 0.081 in. (2 mm) nominal wall thickness Blades Drainable design, heavy gauge extruded 6063-T5 aluminum, 0.081 in. (2 mm) nominal wall thickness, positioned

  • Model TSU50 Weatherhood (#471095)

    ® Assembly Instructions PN 471095 Model TSU50 Weatherhood PARTS LIST Front Cover - Qty 1 Cover End - Qty 1 Lifting Lug - Qty 4 Right Side Panel Right Support Leg Top Cover - Qty 3 Top End Panel - Qty 2 Lifting Bracket Backing Plate - Qty 4 Left Side Panel Left Support Leg Back Retaining Angle - Qty

  • Model ERT

    "Product Specification GuideGreenheck Model ERT –– Packaged Air-to-Air Energy Recovery Units with Cooling and/or HeatingFor Outdoor or Indoor InstallationCSI MasterFormat Category 23 XX XX(Greenheck suggests the use of category # 23 72 23) ************************************************************

  • Closed Indicator Switch for Curtain Fire Dampers

    Rated Current 15A Switch Type Single pole, double throw type Operating Temperature -13°F to 176°F (-25°C to 80°C) See complete marking on product. UL 508 Classification E41515 The closed indicator switch is a high sensitivity hinge lever used on curtain fire dampers. When the damper blades close, th

  • FX10 Controller

    ® FX10 Controller Supplement Manual This supplement is intended to be used in conjunction with the IG/IGX Installation,Operation and Maintenance Manual (Document 470656). The FX10 controller is used on multiple furnace staged control units. The function and operation of the FX10 controller is the sa

  • README_Revit

    1 P.O. Box 410 Schofield, WI 54476 Phone: 715.359.6171 www.greenheck.com Thank you for downloading our Revit content! We are in the process of transitioning from providing Revit projects, to providing Revit family files from our eCAPS web platform. This pdf is a reference guide to assist you with co

  • HTOD Series (#479583 IOM)

    Receiving and Handling Upon receiving dampers, check for both obvious and hidden damage. If damage is found, record all necessary information on the bill of lading and file a claim with the final carrier. Check to be sure that all parts of the shipment, including accessories, are accounted for. Damp

  • HCD-x30 Series

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel HCD – x3x Series Control DampersFacility Service SubGroup: Division 23 HVAC (Previously Division 15) ***********************************************************************************************

  • HPR-xxx Series

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification Guide Model HPR-xxx Series Pressure Relief DampersFacility Service SubGroup: Division 23 HVAC (Previously Division 15) ****************************************************************************************

  • SEBR-xx Series

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel SEBR-xx series Backdraft DampersFacility Service SubGroup: Division 23 HVAC (Previously Division 15) ***********************************************************************************************

  • HVLS Control - Keypad (#483885 IOM)

    ® High Volume, Low Speed Keypad Control® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety

  • Save Time and Money on Fan Installations

    ® FROM THE INSIDE OUT FROM THE INSIDE OUT A technical educational paper for engineers and contractors in the air movement and control industry. Industry White Papers P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2008 Greenheck Fan Corp. Save Time and Money on Fan I

  • Static Round Fire

    " P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.comProduct Specification GuideModel FDR-500 Series Round Static Fire DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) ***************************************************************************************

  • HVAC University Course Guide

    COURSE GUIDE COURSE GUIDE COR-001 Applying State-of-the-Art Engineering Technology in Manufacturing 1 This course will introduce you to state-of-the-art engineering technology for designing and manufacturing world class HVAC equipment. You will observe and tour an AMCA Air chamber and rapid prototyp

  • Model USGF (#462077 IOM)

    ® Ultimate Steel Grease Fan 1® Document 462077 Model USGF Ultimate Steel Grease Fan Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect y

  • Furnace Controller IGF v1.02 (#482642 IOM)

    ® Document 482642 Furnace Controller for Tempered Air Products Reference Guide for Furnace Controller Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observi

  • HCDR-351

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel HCDR-351 Control DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) *******************************************************************************************************

  • Vektor-H and Vektor-HS with High Wind and Hurricane Certification

    Laboratory Exhaust Systems Vektor ®-H and Vektor ®-HS • High Wind and Hurricane Certification Miami-Dade NOA Certification The Vektor-H and Vektor-HS are the industry’s first laboratory exhaust fan systems to be certified to high wind standards. Advantages of NOA Certification • Pre-certified produc

  • EHH-501X (#475580 IOM)

    Part # 475580 Installation, Operation and Maintenance Instructions Model EHH-501X Copyright © 2012 Greenheck Fan Corporation Part# 475580 June 2012

  • CRD-2WT Series

    " P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.comProduct Specification GuideModel CRD-2WT Ceiling Radiation DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) **********************************************************************************************

  • Model PVe (#472846 IOM)

    1 Model PVe Heat Recovery Unit ® Installation, Operation and Maintenance Manual Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to compl

  • Vertical Fan Coil (Model VFC) (#464696 IOM)

    ® Document 464696 Model VFCD and VFCB Vertical Fan Coil Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observ

  • IDHB and IDHE

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel IDHB, IDHE, IDHE-O Series Duct HeatersFacility Service Subgroup: 23 82 33 – Electric Duct Heaters **************************************************************************************************

  • GJX-36-160-0627 (pdf)

    0 30 30 15 0 -15 -30 60 90 120 [ft] 200 [fpm] Velocity [fpm] 1000 800 600 400 200 0 GJX-36-160-0627

  • General Conversion Table (TI/100-02)

    product application guide ® A technical bulletin for engineers, contractors and students in the air movement and control industry. Technical Information TI/100-02 P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2002 Greenheck Fan Corp. ® General Conversion Table This

  • "ECD-601 (6"" Frame, Exposed Linkage)"

    ECD-601 Combination Louver/Damper, Drainable Blade Extruded Aluminum Standard Construction Frame Heavy gauge extruded 6063-T5 aluminum, 6 in. (152 mm) x 0.081 in. (2 mm) nominal wall thickness Blades Drainable design, heavy gauge extruded 6063-T5 aluminum, 0.081 in. (2 mm) nominal wall thickness, po

  • Vektor-M Series VKCURB Fastener Kit (#1016011 IOM)

    1 Fastener Kit • Interior Section of Modular Roof Curb, Rev. 1, February 2018 Copyright 2018 © Greenheck Fan Corp. ® Document 1016011 Vektor-M Series Fastener Kit Interior Section of Modular Roof Curb Laboratory Exhaust System Assembly Instructions READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING A

  • Model RJ-6 x 9 (Pitched Roof Cap IOM)

  • VCD-2xV, VCD-3xV and VCD-42V

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.comf Product Specification GuideMODEL VCD-23V and VCD-3xV Control DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) *******************************************************************************************

  • Model DG / DGX Industrial Space Heating (#464044 IOM) (Pre-2009)

    Part # 464044 ® **WARNING** Disconnect and secure all electrical power to the “OFF” position prior to inspection or servicing. Failure to comply with this safety precaution could result in serious injury or death. **IMPORTANT** All factory provided lifting lugs must be used when lifting any unit. Fa

  • QD-Cat_InlineandSidewallExhaustFans

    28 F C E A 1 in. B UL/cUL 705 Power Ventilators E40001 - BCF with TEFC motors E40001 - BDF with TEFC motors Dimensions for BCF Top horizontal discharge Model Size A B C E F 106 20 231⁄4 11 12 6 107 23 29 13 15 8 108 26 32 16 18 10 110 32 36 19 24 12 112 36 42 23 28 14 206 34 231⁄4 11 26 6 207 38 29

  • Warranty Statement for Kynar/Acroflur Finish (50% PVDF) Galvaneal

    P.O. Box 410 Schofield, WI 54476 Phone: 715.359.6171 www.greenheck.com Louvers Architectural Finish Limited Warranty Kynar/Acroflur (50% PVDF) Paint Greenheck warrants the finish of Kynar/Acroflur (50% PVDF) paint for a period of 1 year from the date of product shipment when applied to galvaneal lou

  • "EAH-690 (6"" Frame, High Free Area)"

    EAH-690 Adjustable Louver, J Blade Extruded Aluminum Standard Construction Frame Heavy gauge extruded 6063-T5 aluminum, 6 in. (152 mm) x 0.125 in. (3 mm) nominal wall thickness Blades J style design, heavy gauge extruded 6063T5 aluminum, 0.081 in. (2 mm) nominal wall thickness, positioned 45º or 90º

  • HVAC University Architects Course Descriptions

    COURSE GUIDE COURSE GUIDE AIA-001 Allotting the Proper Space for Ventilation Equipment and Minimizing System Effect to 1LU/HSW Reduce Fan Energy Consumption. Each ventilation fan size and type is designed to operate efficiently over a narrow range of airflow and duct resistance. Additionally, fan pe

  • Model TSU Make Up Air Unit

    "Direct Gas-Fired Make-Up Air Model TSU Heavy Duty, High Airflow Applications August 2012 • Manufacturing and Industrial Facilities • Up to 64,000 cfm The Greenheck model TSU is a 100% efficient direct gas-fired heating and ventilating unit. Airflow options include 100% make-up air for constant volu

  • MS-4209, MS-4309, MS-4709, MS-4809, MS8209, MS-8309

    SPECIFICATION DATA 38-00006-02 N314 MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators FOR FIRE/SMOKE CONTROL APPLICATIONS APPLICATION The MS4104, MS4109, MS4604, MS4609, MS8104, MS8109 Fast-Acting, Two-Position Actuators are spring return direct coupled actuators (DC

  • Heavy Duty and Industrial Damper Product Selection Guide

    Heavy Duty/Industrial Damper Product Selection Guide Greenheck offers a wide variety of products for industrial and severe environment applications. This product selection guide is a quick reference to our heavy-duty/industrial damper offering. In addition to the standard products, Greenheck’s exper

  • Microprocessor Controller TAP v2.40 (#481941) October 2016 (RVE, ERCH-01, ERT-01)

    "® Document 481941 Microprocessor Controller for Tempered Air Products Reference Guide for Microprocessor Controller Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and ot

  • Specialty Shapes

    "Standard Construction Frame: Heavy gauge 6063T5 extruded aluminum Blades: Heavy gauge 6063T5 extruded aluminum positioned at 45° angles Birdscreen: 3⁄4"" x .051"" flattened expanded aluminum. Screen is mounted on inside (rear) Finish: Mill Minimum Size: 20"" Diameter. Consult Greenheck if smaller s

  • Mineral Wool Thermal Blanket (TB-24)

    TB-24 is a non-asbestos mineral wool thermal blanket. This mineral wool thermal blanket material is listhed with UL to be used as an accessory to Greenheck’s ceiling radiation dampers or to be used as a batt and blanket material. Thermal blanket (around perimeter of damper) Ceiling radiation damper

  • Vektor-M Series Nozzle to Stack to Fan Fastener Kit (#1016007 IOM)

    1 Fastener Kit • Nozzle to Stack, Stack to Fan, Rev. 1, February 2018 Copyright 2018 © Greenheck Fan Corp. ® Document 1016007 Vektor-M Series Fastener Kit Nozzle to Stack, Stack to Fan Laboratory Exhaust System Assembly Instructions READ THROUGH THESE INSTRUCTIONS PRIOR TO STARTING ASSEMBLY. Phone:

  • "EACC-601 (6"" Frame, Concealed Actuator)"

    EACC-601 Combination Louver/Damper, Concealed Actuator Extruded Aluminum Standard Construction Frame Heavy gauge extruded 6063-T5 aluminum, 6.2 in. (157 mm) x 0.125 in. (3 mm) nominal wall thickness Blades Stationary blade: drainable design, heavy gauge extruded 6063-T5 aluminum, 0.081 in. (2mm) nom

  • Greenheck Vektor-H Laboratory Exhaust System Offers Cost Savings and Significant Engineering Benefits

    A technical educational paper for engineers and contractors in the air movement and control industry. Industry White Papers P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2012 Greenheck Fan Corp. Greenheck Vektor®-H Laboratory Exhaust System Offers Cost Savings and

  • Vektor-ERS-MD Fan Plenum Curb Assembly Instructions (#474117 IOM)

    1 Fan Plenum Curb for Vektor™ ® Part #474117 Fan Plenum Curb Assembly Vektor™ ERS-MD Fan Plenum Curb Assembly Instructions Greenheck VK-ERS curb is shipped in sections for field assembly. All required hardware is provided. Attachment to roof or structural members and building weather protection by o

  • Standard Control - MSSC (#476372 IOM)

    Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instr

Previous 24 25 26 27 28 Next Page 26 of 29
Results per page: