Search Results

Number of Results: 1590

Content (1590) Products (877)
Previous 10 11 12 13 14 Next Page 12 of 32
Results per page:

  • Fabra Hood, Multi Section with Birdscreen, throat length greater than 72 inches (#471323 IOM)

    ® Fabra Hood Gravity Ventilator 1® Document 471323 Model FGI and FGR with Birdscreen Fabra Hood Gravity Ventilator Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain t

  • Siemens GVD Series (#485725 IOM)

    ® Siemens Actuators - GVD 1® Document 485725 Installation Instructions for Siemens Actuators Direct Drive Series (GVD) These instructions apply to the external field installation of Siemens actuators on Greenheck control dampers. These models are direct drive actuators that rotate to their energized

  • Honeywell Actuator Spring Return (#483595 IOM)

    Item Part Description Qty 1 723092 Anti-rotation bracket 1 2 815027 Extension pin support bracket 1 3 415455 1⁄4 - 20 spinlock ZP nut 8 4 417279 #10-24 x 1.068 ZP stud 1 5 415934 #10-24 HH Nylock ZP nut 1 6 415264 1⁄4-20 x 1⁄2 in. ZP bolt 8 7 - Honeywell actuator 1 Galvanized Steel Kit Model Volts R

  • EFB Series Actuators External Mount (#482710 IOM)

    These instructions apply to the external field installation of Belimo actuators on Greenheck control dampers. These models are direct drive actuators that rotate to their energized position when power is applied, and spring return to their fail position when power is disconnected. Model Volts Runnin

  • MSxx04 & MSxx09 Series External (#477252 IOM)

    Power Consumption Model Volts Running Holding MS4104 120 18W 9W MS4109 120 23W 7W MS4604 230 18W 11W MS4609 230 23W 7W MS8104 24 16VA 8VA MS8109 24 23VA 7VA No. Part No. Qty Description 1 730417 1 External mounting bracket 2 415455 8 1⁄4 - 20 Spinlock nut 3 416048 1 #10-24 x 3⁄8 Shoulder bolt 4 4159

  • MS7505 and MS8105 Series (#473389 IOM)

    Item Part No. Quantity Description 1 723092 1 Anti rotation bracket 2 815027 1 Standoff bracket 3 - 1 Actuator 4 415455 9 1⁄4 - 20 spinlock nut 5 417272 1 Mounting stud 6 415934 1 #10-24 hex nut (not shown) 7 416048 1 1⁄4 x 3⁄8 shoulder bolt (not shown) 8 415264 8 1⁄4 - 20 x 1⁄2 TEK screw Model Volt

  • MS4120, MS4620, MS8110, MS8120, MS7510, MS7520 Series (#464287 IOM)

    Model Volts Running Holding MS4120F1006 120 VAC 35W 10W MS4120F1204 MS4620F1005 230 VAC 35W 10W MS4620F1203 MS7510A2008 24 VAC/VDC 14W 5W MS7510A2206 14W MS7520A2007 16W MS7520A2015 22W MS7520A2205 16W MS7520A2213 22W MS8110A1206 24 VAC/VDC 30W 8W MS8120F1002 24 VAC 45W 10W MS8120F1200 These instruc

  • AMB, FSLF, LF, LMB, NMB, TF Series External Mount (#468753 IOM)

    Item Part No. Qty Description 1 723092 1 Anti-rotation bracket 2 815027 1 Standoff bracket 3 415455 8 1⁄4 - 20 spinlock nut 4 417279 1 Mounting stud 5 415934 1 Keps hex nut zp 6 415264 8 1⁄4 - 20 x 1⁄2 TEK screw 7 - 1 Actuator These instructions apply to the external field installation of Belimo act

  • AFB, AFBUP, FSAF, FSNF, NFB Series Actuators External Mount (#464236 IOM)

    Item Part Description Qty 1 732089 Anti-rotation bracket 1 2 815027 Extension pin support bracket 2 3 - Belimo actuator 1 4 415455 1⁄4 - 20 spinlock ZP nut 8 5 417279 #10-24 x 1.068 ZP stud 1 6 415934 #10-24 HH Nylock ZP nut 1 7 415264 1⁄4-20 x 1⁄2 in. ZP bolt 8 Galvanized Steel Kit Model Volts Runn

  • Models Vektor-MH, Vektor-MD, and Vektor-MS (#464652 IOM)

    Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with these

  • Models Vektor-CH, Vektor-CD and Vektor-CS (#471555 IOM)

    ® Document 471555 Model Vektor®-CH, Vektor®-CD and Vektor®-CS Laboratory Exhaust System Laboratory Exhaust Systems 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintai

  • SMD-301V

    *W and H dimensions furnished approximately 1⁄4 in. (6mm) undersize. Add sleeve thickness for overall sleeved damper dimension. See complete marking on product. UL 555S Classification R13317 The SMD-301V is a leakage rated smoke damper with vertical airfoil blades for operational closure in emergenc

  • OFD-150

    See complete marking on product. UL 555 Classification R13317 Factory Supplied Thermal Blanket Grille (Supplied by others) Fire Damper Fire Rated Partition 7 1/2” Max. *W H dimensions furnished approximately 1⁄4 in. (6mm) undersize. (Add blanket thickness [1⁄8 in. (32mm)] plus sleeve thickness for o

  • ODFD-150

    See complete marking on product. UL 555 Classification R13317 *W H dimensions furnished approximately 1⁄4 in. (6mm) undersize. (Add blanket thickness [1⁄8 in. (32mm)] plus sleeve thickness for overall sleeved damper dimension.) Oversize opening as follows: Nominal damper size + 3⁄8 in. (9.5mm). 3 11

  • MBD-15

    Model MBD-15 Manual Balancing Damper Multi-Blade W x H Minimum Size* Maximum Size Single Section Multiple Section Inches 6 x 6 48 x 60 96 x 96 mm 152 x 152 1219 x 1524 2438 x 2438 * Note: If the height is less than 9 in. (228mm) or less, the damper will have one blade. Size Limitations *W H dimensio

  • HCDR-350

    J D* F 6 in. Model HCDR-350 is a heavy duty round industrial control damper with a flanged style frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety of optional features allows the model HCDR-350 to be tailored to the application. *

  • HCD-524

    "Model HCD-524 is a heavy duty industrial control damper with a flanged frame for high temperature applications. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety of optional features makes model HCD-524 extremely versatile, allowing its

  • HCD-324

    "W x H Minimum Size Maximum Size Single Section Inches 61/2 x 6 48 x 60 mm 165 x 152 1219 x 1524 Size Limitations The W dimension is ALWAYS parallel with the damper blade length. Damper linkage and axles may extend beyond the damper flange based on the configuration of selectable options. Consult fa

  • HB-330

    HB-330 Industrial Backdraft Damper Fabricated Airfoil Blades W x H Minimum Size Maximum Size Single Section Multi - Section Inches 6 x 6 60 x 96 120 x 96 mm 152 x 152 1524 x 2438 3048 x 2438 Size Limitations Advise air flow direction counterbalance weight location when ordering * Actual inside dimen

  • FSD-311V

    See complete marking on product. UL 555 555S Classification R13317 *W& H dimensions furnished approximately 1⁄4 in. (6mm) undersize. Add sleeve thickness for overall sleeved damper dimension. W H Minimum Size Maximum Size Single Section Multiple Sections 2000 fpm (10.2 m/s) Inches 6 x 8 50 x 32 100

  • HTOD Series

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel HTOD-xxx Series TORNADO DAMPERSFacility Service SubGroup: Division 23 HVAC (Previously Division 15) ************************************************************************************************

  • Fabra Hood, Single Section with Birdscreen, throat length less than or equal to 72 inches (#471321 IOM)

    "® Fabra Hood Gravity Ventilator 1® Document 471321 Model FGI and FGR with Birdscreen Fabra Hood Gravity Ventilator Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain

  • Fabra Hood, Single Section with Filters, throat length less than or equal to 72 inches (#471322 IOM)

    "® Fabra Hood Gravity Ventilator 1® Document 471322 Model FGI and FGR with Filters Fabra Hood Gravity Ventilator Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the

  • Preventing Condensation and Thermal Expansion/Contraction in HVAC Grilles, Registers, and Diffusers (AD/05-24)

    A technical bulletin for engineers, contractors and students in the air movement and control industry P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • greenheck.com • Copyright © 2023 Greenheck Fan Corp. Air Distribution AD/05-24 If the metal surface temperature gets too low, droplets of water ca

  • MOA Microprocessor Controller & Electrical Supply (#486462 IOM)

    "® MOA Microprocessor Controller Electrical Supply 1® Document 486462 Modular Open Array Microprocessor Control Electrical Supply Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operat

  • PVF/PVG Indirect Gas-Fired Heat Modules (#481038 IOM)

    MUA Indirect Gas-Fired Heat Modules/Furnaces 1 Recognized Component Model PVF WARNING FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death or property damage. Be sure to read and understand the installation,operation and service instructions in thi

  • EHH-601DE (481315 IOM)

    EHH-601DE Installation 1 Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Fai

  • ESD-635DE (IOM #481375)

    1 Installation Instructions Part #481375 SAFETY WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating, and maintenance instructions thoroughly before installing or servicing this equipment. This man

  • EHH-601D, Channel Installation with VCD-40 Damper (#474644 IOM)

    ® EHH-601D Channel Installation with Damper 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all s

  • EHH-601D, Channel Installation (#474643 IOM)

    EHH-601D Channel Installation 1 Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety informati

  • EHH-601D, Flange/Sleeve Installation with VCD-40 Damper (#474642 IOM)

    ® EHH-601D Flange/Sleeve Installation with Damper 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing

  • EHH-601D, Flange/Sleeve Installation (#474641 IOM)

    ® EHH-601D Flange/Sleeve Installation 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety

  • ESD-635D, Channel Installation with VCD-40 Damper (#474640 IOM)

    ® ESD-635D Channel Installation with Damper 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all s

  • ESD-635D, Chanel Installation (#474639 IOM)

    ® ESD-635D Channel Installation 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety inform

  • ESD-635D, Flange/Sleeve Installation with VCD-40 Damper (#474638 IOM)

    ® ESD-635D Flange/Sleeve Installation with Damper 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing

  • ESD-635D, Flange/Sleeve Installation (#474637 IOM)

    ® ESD-635D Flange/Sleeve Installation 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety

  • Understanding Temperature and Altitude Corrections (FA/102-24)

    A technical bulletin for engineers, contractors and students in the air movement and control industry P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • greenheck.com • Copyright © 2023 Greenheck Fan Corp. Fan Application FA/102-24 Understanding Temperature and Altitude Corrections The best way to

  • EM-40 Series

    *W H dimensions furnished approximately 1⁄4 in. (6mm) under size. 3 1/8 in. Airflow 1 1/2 in. 1 12 in. 3 in. 5 in. 11 1/8 in. / EM-40 No Flange EM-41 Flange On Discharge EM-42 Flange On Intake The EM-40 series is a horizontally mounted backdraft damper that is designed to allow vertical airflow and

  • FBV-23

    The FBV-23 is a vertical style face and bypass low leakage damper with 3V blades. This model is intended for application in low to medium pressure and velocity systems. The FBV-23 is IECC (International Energy Conservation Code) compliant with a leakage rating of 3 cfm/ft2 at 1 in. wg (55cmh/m2). Ve

  • Miami-Dade/Florida Louver Products Reference Chart

    Model Name Max. Wind-load Construction Description Dimensions – inches (mm) AMCA Certifications AMCA Listed Miami-Dade County, FL NOA No. Florida Product Approved No. Florida Test Protocols Minimum Opening Maximum Section Maximum Opening Dimensions – inches (mm) Miami-Dade Approved Louvers and Penth

  • Weatherhood (#472040 IOM)

    ® Weatherhood 1® Assembly and Installation Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with th

  • Hurricane-Prone Region Louver Products Reference Chart

    AMCA 540 AMCA 550 Listed Louvers Model Name Max. Wind-load Construction Description Dimensions – inches (mm) AMCA Certifications AMCA Listed Miami-Dade County, FL NOA No. Florida Product Approved No. Florida Test Protocols Minimum Opening Maximum Section Maximum Opening Dimensions – inches (mm) EVH-

  • VCD-2x, VCD-3x, VCD-42, FBx-23, FBx-33

    "P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel VCD-2x, VCD-3x, VCD-42, SEVCD-23, SEVCD-33, and FBV-23 Control DampersFacility Service Subgroup: Division 23 HVAC (Previously Division 15) *********************************************************

  • virtualhvacuemail_February2024

    Sample email for you to send to your customersTo: From: Subject: Greenheck’s Virtual HVAC University Classes We are excited to inform you that Greenheck is offering virtual HVAC University classes. Several one-hour classes on different topics are presented monthly. The classes are presented live by

  • International Warranty Statement

    Revision 1.9.2024 International Warranty Statement Warranty Greenheck warrants our manufactured equipment to be free from defects in material and workmanship for a period of 12 months from the date of installation/commissioning or 18 months from the date of shipment, whichever occurs first. Any unit

  • Winter is here - are your coils ready?

    200 Morgan Street ▪ Brownsville, TN 38012 ▪ (901)466-7300 ▪ www.precision-coils.com TO: Business Partners FROM: Megan Sutton Business Development Manager – Precision Coils DATE: January 15, 2024 SUBJECT: Winter is here—are your coils ready? While it's been a mild start across much of the U.S., winte

  • Krueger Floral Project Profile

    Greenheck Project Profile Krueger Wholesale Florist, Inc. Rothschild, WI Engineer: MTI Green Bay, WI General Contractor: Versatile Construction, LLC Wausau, WI Greenheck Representative: Vyron Corporation Wausau, WI Improve temperature control for employee comfort. Regulate moisture control to preven

  • virtualhvacuemail_January 2024

    Sample email for you to send to your customersTo: From: Subject: Greenheck’s Virtual HVAC University Classes We are excited to inform you that Greenheck is offering virtual HVAC University classes. Several one-hour classes on different topics are presented monthly. The classes are presented live by

  • Greenheck General Warranty Statement

    Revision 1.5.2024 Warranty Statement Warranty Greenheck warrants its equipment to be free from defects in material and workmanship for a period of one year from the date of shipment. Many products carry a longer warranty period based on the type of product and components contained within each unit.

  • EVH-302D

    Standard Construction Mounting Continuous aluminum angles along the head and sill Frame Heavy gauge extruded 6005-T5 aluminum, 3 in. (76 mm) x 0.081 in. (2 mm) jamb and 0.062 in. (2mm) head/sill nominal wall thickness Blades Vertical rain resistant design, heavy gauge extruded 6005-T5 aluminum, 0.05

Previous 10 11 12 13 14 Next Page 12 of 32
Results per page: