Search Results

Smoke Detector DUCT SD

"The primary purpose of duct smoke detection is to prevent injury, panic, and property damage by reducing the spread (recirculation) of smoke. The detector samples air currents passing through a duct and gives dependable performance for management of smoke and combination fire smoke dampers. Duct sm

Vari-Green Drive App Quick Start Guide (#483564 IOM)

6:23 AM 89% 6:23 AM 89% 6:23 AM 89% 6:23 AM 89% 6:23 AM 89% 6:23 AM 89% 1. Install the Vari-GreenTM Drive app on your mobile device. The app is available on the Apple app store. Power up the Vari-Green Drive. 2. Open the Vari-Green Drive app and select “Connect New Product”. Follow the steps in the

Modelo GB (Spanish #453005 IOM)

"Manual de Instalación, Operación Y Mantenimiento Una vez que haya recibido la unidad, revise por la existencia de algún daño e infórmelo inmediatamente al remitente. También revise que todos los accesorios o artículos hayan sido incluidos. Mueva el ventilador al lugar deseado y asegúrelo a los orif

Model VSU

"Product Specification GuideModelVSU– Packaged Make-Up Air Unit with Direct Gas-Fired Furnace For Outdoor or Indoor InstallationCSI MasterFormat Category 23 74 XX ************************************************************************************************************************Note to User: Thi

DGK (#468695 IOM)

® Document 468695 Model DGK Make-Up Air Unit Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all saf

Fan Selection and Energy Savings

H By BRIAN MLEZIVA Greenheck Fan Corp. Schofield, Wis. HVAC design engineers face many choices throughout the planning process, perhaps few as crucial as that of fan equipment, a principal consumer of energy. This article will discuss options for improving energy efficiency when designing an HVAC sy

IG / IGX (#470656 IOM) (pre-October 2015)

Installation, Operation and Maintenance Manual Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result

Promerus Project Profile

Greenheck Project Profile Promerus Akron, OH Engineer: Tec, Inc. Eastlake, OH Mechanical Contractor: Creative Comfort Systems Hinckley, OH Greenheck Representative: Air Control Products, Inc. Broadview Heights, OH Provide the correct air changes and temperature control for laboratory, office, and wa

Bracket Hinge Kit (#481366 IOM)

Document 481366 Bracket Hinge Kit Centrifugal Downblast Exhaust - Sizes 060-200 Centrifugal Upblast Exhaust - Sizes 060-200 Bracket Hinge Kit Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, ins

Frost Control for Energy Recovery Wheels (ERA/113-05)

product application guide ® A technical bulletin for engineers, contractors and students in the air movement and control industry. Energy Recovery Application ERA/113-05R P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2005 Greenheck Fan Corp. ® Frost Control for Ene

High Temperature Exhaust (FA/109-01)

"product application guide ® A technical bulletin for engineers, contractors and students in the air movement and control industry. Fan Application FA/109-01 P.O. Box 410 • Schofield, WI 54476 • 715.359.6171 • Fax 715.355.2399 Copyright © 2001 Greenheck Fan Corp. ® High Temperature Exhaust Many are

O-Ring Axle Seal

• O-ring Axle Seal Replacement, Rev 2, July 2020 Copyright 2020 © Greenheck Fan CorporationGFC As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice. Product warranties can be found online at Greenheck.com, either on the specifi

Model ERVe (#472119)

® Roof Curb and Duct Adaptor Assembly 1® Document 472119 Roof Curb and Duct Adapter Assembly Model ERVe Assembly and Installation Instructions Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product describe

IDHB IDHC Specification

"P.O. Box 410Schofield, WI 54476 Phone: 715.359.6171www.greenheck.com Product Specification GuideModel IDHB and IDHC Series Duct HeatersFacility Service Subgroup: 23 82 33 – Electric Duct Heaters *******************************************************************************************************

USCG Renewal Letter

AFDW Specification

"Product Specification GuideBelt Driven Airfoil Double Width Centrifugal Fan, Model AFDWFacility Services Subgroup: Division 23 (Previously Division 15) ****************************************************************************************************************************Specifier Notes: This p

Motor Starter Standard Control (MSSC)

"Product Specification GuideModel Motor Starter Standard Control (MSSC) ************************************************************************************************************************Note to User: This document is subject to copyright protection and is proprietary to Greenheck Fan Corporati

MaxitrolSeries14_iom

"SERIES 14 INSTALLATION INSTRUCTIONS and field service check list Page 2 Introduction and Dimensions Page 3 Specifications Installation of Components Page 4 5 Field Service Checklist Page 6 Preliminary Circuit Analysis Low Fire Start Time Adjustment Sensitivity Adjustment Page 7 Wiring Diagrams Page

Belt Drive, Model SAF

"Product Specification GuideModel SAF Belt Driven Centrifugal Roof SupplyFacility Services Subgroup: Division 23 Section 23 34 23 ************************************************************************************************************************ Specifier Notes: This product specification guide

Renaissance_Patriot_Place

"Greenheck Project Profile Renaissance Boston Hotel Spa at Patriot Place Foxborough, MA Engineering Firm Zade Associates, LLC Boston, MA Mechanical Contractor PH Mechanical Corporation Boston, MA Greenheck Representative Buckley Associates Hanover, MA Provide a comprehensive energy efficient ventila

ERV Application Manual

"Energy Recovery Application Manual March 1997 Table of Contents Chapter 1: The Need for Mechanical Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Chapter 2: The Enthalpy Wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty Statement for Centrifugal Ceiling and Cabinet Exhaust - SP and CSP

Centrifugal Ceiling and Cabinet Exhaust SP and CSP (12/12) Page 1 of 1 Copyright © 2012 Greenheck Fan Corporation P.O. Box 410 Schofield, WI 54476 Phone: 715.359.6171 www.greenheck.com Warranty Statement for Centrifugal Ceiling and Cabinet Exhaust – SP and CSP Greenheck Fan Corporation warrants its

SDPHE Hazardous Sidewall Propeller Fans (#475267)

® Hazardous Sidewall Propeller Fans 1® Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety in

Grand_Canyon_Univ_AZ

Greenheck Project Profile Grand Canyon University College of Arts and Science Building Phoenix, AZ Mechanical Engineer: MSA Engineering Consultants Phoenix, AZ Contractor: Pono Construction Phoenix, AZ Subcontractor: Central Supply Metal Company Phoenix, AZ Architect: Orcutt | Winslow Phoenix, AZ Gr

Model FPB

Pressure Blowers Model FPB August 2008 Commercial Industrial Applications Page Header 2 Model FPB Model FPB Model FPB pressure blowers are suitable for clean air exhaust or supply applications. They utilize radial aluminum blade wheels to provide peak performance for systems that require low flow an

MPX (#472695 IOM)

"General Safety Information DANGER • Always disconnect power before working on or near this equipment. Lock and tag the disconnect switch or breaker to prevent accidental power up. • If this unit is equipped with optional gas accessories, turn off gas supply whenever power is disconnected. CAUTION T

GJX-41-160-0616 (pdf)

0 30 30 15 0 -15 -30 60 90 400 [fpm] 120 [ft] Velocity [fpm] 1000 800 600 400 200 0 GJX-41-160-0616

New Test Standard for Dilution Blowers

For reasons of safety and health, not to mention litigation, consulting and facility engineers have long insisted on independent performance verification for fans and blowers used in general HVAC, as well as more critical applications. With their unique discharge design, however, high plume dilution

eCAPS Bridge_Parameter Management

For feedback or questions, contact: BIM@GREENHECK.COM Rev. 2 GREENHECK eCAPS BRIDGE FOR REVIT Working with shared parameters The four parameter mapping buttons allow for: a) Adding user shared parameters to Greenheck families b) Data from Greenheck parameters to be mapped to user parameters. • Creat

Multi-Voltage Transformer

The Multi-Voltage transformer converts primary voltage of 480V/277V and 240V/208V to secondary voltage of 120V. The transformer is shipped loose and is provided with a plate on the primary side for mounting on a standard 4 in. (102mm) outlet box. For hookup to 3 phase primary source, connect common

Rice_University_Project_Profile

Greenheck Project Profile Rice University, M.D. Anderson Biological Laboratories Building Houston, TX Engineering Firm: Burns, DeLatte McCoy, Inc. Houston, TX Mechanical Contractor: T.D. Industries Houston, TX Greenheck Representative: H.D. Grant Co., Inc. Houston, TX Exhaust laboratory fumes high a

GreenHeat Industrial Space Heating

March 2008 Industrial Space Heating Direct Gas-Fired Heating • Greenheat® 100% Outdoor Air • 80/20 Recirculation • Greenheat® 50/50 Recirculation 2 Industrial Space Heating Greenheck’s space heating systems are designed to heat large spaces as comfortably and economically as possible. Greenheck’s sp

Software_Technology

Greenheck Project Profile Software Technology Park Lahore, Punjab, Pakistan Engineering Consultant: National Engineering Services of Pakistan (NESPAK) Lahore, Punjab, Pakistan Pakistan Contractor: China State Construction Engineering Corporation Islamabad Greenheck Representative: Khan Brothers Head

DX Coils - Replacement blank coil drawings

CAPACITY CHEP1 EVAPORATOR TEMP MODEL NO. REFRIGERANT FPISP1FHSP2 DX COILS 2 1/8 RETURN F 12 678 8 6 534 10 FPI AVAILABLE ROWS AVAILABLE 16 GA. STAINLESS STEEL ALUM. .016 .006 3/8 16 GA. GALV. STEEL .020 .025 .035 .049 5/8 1/2 9 .016 .020 10 CASING HEADERS COPPER ONLY TUBES OD Wall Thickness COPPER O

PRAD and VRAD

The PRAD (Positive) and the VRAD (Negative) pressure relief doors are designed to open automatically at 1 in. wg (.25 kPa) above normal operating system pressure. The function of these doors is to prevent ductwork from imploding or exploding in the event the dampers close while the fan is still oper

PLG Belt Drive

"Product Specification GuideUnhoused Plug, Belt Drive, Centrifugal Fan, Model PLGFacility Services Subgroup: Division 23 (Previously Division 15) ***************************************************************************************************************************Specifier Notes: This product s

Wall Mounted Collar for Sidewall Propeller Fans (#451424 IOM)

1Sidewall Propeller Fans • Wall Mount Collar ® Document 451424 Wall Mount Collar for Sidewall Propeller Fans Assembly and Installation Instructions Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product des

Model OPA Open Plenum Array (#484885 IOM)

® Open Plenum Array 1 Document 484885 Model OPA Open Plenum Array Installation, Operation and Maintenance Manual Please read and save these instructions for future reference. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others

Modular Jib Crane

Simplified installation, ease of maintenance, and reliability are all provided by incorporating a Vektor modular jib crane with your Vektor laboratory exhaust system. Greenheck’s Vektor modular jib crane is engineered to simplify motor maintenance. Quick-connect crane supports are easily mounted dir

ABD

Diameter (mm) Individual Set Points Airflow Range - CFM* (m3/s) 4 in (102) 20 25 to 130 (.012 to .061) 5 in (127) 20 25 to 130 (.012 to .061) 6 in (152) 24 50 to 275 (.024 to .130) 8 in (203) Exhaust 26 125 to 400 (.059 to .189) 8 in (203) Supply 26 105 to 425 (.050 to .201) Airflow Range by Size *

Warranty Statement for Louver Products

Louver Product Limited Warranty, Warranty Statement (12/12) Page 1 of 1 Copyright © 2012 Greenheck Fan Corporation P.O. Box 410 Schofield, WI 54476 Phone: 715.359.6171 www.greenheck.com Warranty Statement for Louvers Product Limited Warranty Thank you for purchasing Greenheck louvers. Greenheck warr

Product Information – EAD-635 Adjustable Louver

Fewer Louvers = Lower Costs Initial Cost, Installation Cost Operational Cost EAD-635 GREENHECK’S Aluminum 35º Adjustable Blade Louver PRODUCT INFORMATION Application Case Study Did you know specifying the Greenheck EAD-635 adjustable blade louver for warehouse and distribution center applications ca

QD-Cat_IndoorAirHandlers

74 Indoor Air Handlers Dimensions for VFCD, VFC Model Size A BC Inlet Outlet D E F G VFCD VFC VFCD VFC VFCD VFC 600 40 40 24 24 18 22 5.50 6.75 5.50 4.00 800 40 40 24 24 18 22 7.25 6.75 5.50 6.50 1300 44 24 28 18 22 18.00 8.50 5.63 8.00 1600 44 30 28 22 22 18.00 9.00 5.63 9.00 2000 52 34 28 29 23 26

Sapphire_Mills

Greenheck Project Profile Sapphire Finishing Mills, LTD Raiwind Road, Lahore, Pakistan Engineering Consultant: Fahim, Nanji DeSouza Karachi, Pakistan Pakistan Contractor: Sapphire Mills in-house staff of engineers Greenheck Representative: Khan Brothers Head Office in Karachi, Pakistan Specify and i

AMCA & Greenheck

AMCA Greenheck for Vektor Laboratory Exhaust Summary of AMCA Standards and Certification Programs AMCA 210 - Fan Performance Test Standard AMCA 211 - Certified Fan Performance Ratings Program AMCA 260 - Induced Flow Test Standard Certified Fan Performance Ratings Program AMCA 300 - Sound Testing Sta

WausauCurlingCenter

Greenheck Project Profile Wausau Curling Center Wausau, WI Mechanical Engineering Firm: JDR Engineering, Inc. Fitchburg, WI Contractor: Malbrit Mechanical, Inc. Wausau, WI Greenheck Rep: Vyron Corporation Milwaukee, WI Meet demand for large quantities of outdoor air to satisfy diverse load requireme

ESS-502D

"Application and Design ESS-502D is a Florida Product Approved and Miami-Dade Qualified stationary sightproof blade extruded aluminum louver designed to protect air intake and exhaust openings in building exterior walls. ESS-502D is tested in accordance with AMCA 500-L Air Performance and Water Pene

0541_001

EEMODS-2017-Paper

"Two New Metrics for Fan System Efficiency: Fan Energy Index and Fan Electrical Power Michael Ivanovich*, Mark Stevens*, Michael Wolf** *Air Movement and Control Association (AMCA) International, ** Greenheck Fan Corporation Abstract Two new metrics have been developed by the Air Movement and Contro

"EAD-601 (6"" Frame, Drainable Blade)"

Application and Design EAD-601 is an adjustable louver designed to protect air intake and exhaust openings in building exterior walls that require tight air shut off. Design incorporates a drainable head member and adjustable drainable blades to channel water to the jambs which guides the water thro